Call (206) 350-0055

Edgewood • Viking • Ice Maker

Trusted Edgewood Viking Ice Maker Service

To schedule Viking ice maker repair in Edgewood, call (206) 350-0055. We provide on-site diagnostics, use genuine OEM parts, and offer same-day service appointments throughout all Edgewood neighborhoods. Emergency and urgent repair slots are available daily.

Viking appliances are precision systems. Expert service matching the engineering. OEM parts always. Manufacturer-grade components.

Call (206) 350-0055 Book Service
Takes 30 seconds · No obligation estimate
Licensed & Trained
OEM Parts Only
Same-Day Available
Quick Call Back

Get a response in 15 minutes or less.

Licensed & Trained OEM Parts Only Edgewood, WA

Scheduling service visits in Edgewood — contact us to confirm the next available slot.

Viking ice maker performance issues in Edgewood require an expert eye. Our team specializes in these high-specification units and understands the common failure modes seen in Edgewood homes. If you are also considering professional viking refrigerator support, our local team can help find the right service path.

We prioritize accuracy over speed, ensuring the root cause is identified before we quote the fix. We never compromise on part quality — genuine Viking components only. Available for all Edgewood neighborhoods daily.

Edgewood service calls often involve including single-family homes and various residential properties; Technicians serve all neighborhoods with flexible scheduling. For ice maker work, technicians check water inlet valve function, fill tube condition, ice mold thermostat, and ejector mechanism. Viking service requires careful model verification, OEM part matching, and respect for installation clearances. extended damp seasons around Greater Seattle can accelerate corrosion on neglected connections and hardware

What We Fix

Ice Maker Repairs We Perform

These are the most common ice maker repair tasks we perform — each completed after a proper diagnosis confirms the exact cause.

Ice maker repair

Regarding Viking Ice Maker repair service in Edgewood: For Viking ice maker systems, this service path is performed according to manufacturer specifications.

Water valve replacement

Regarding Viking Ice Maker repair service in Edgewood: For Viking ice maker systems, this service path is performed according to manufacturer specifications.

Inlet valve replacement

Regarding Viking Ice Maker repair service in Edgewood: Inlet valve replacement follows a structured diagnostic that identifies the root cause first. Work only begins after you've approved the quote.

Fan motor replacement

Regarding Viking Ice Maker repair service in Edgewood: This repair is performed after diagnosis confirms the specific component that failed. We use OEM parts — no aftermarket substitutes.

Door seal replacement

Regarding Viking Ice Maker repair service in Edgewood: This is one of the more common ice maker repairs we complete in the area using OEM parts.

Thermostat replacement

Regarding Viking Ice Maker repair service in Edgewood: We don't recommend this repair until diagnosis confirms it's what's actually needed. No guesswork, no unnecessary part replacement.

Control board repair

Regarding Viking Ice Maker repair service in Edgewood: For Viking ice maker systems, this service path is performed according to manufacturer specifications.

Freon leak repair

Regarding Viking Ice Maker repair service in Edgewood: We don't recommend this repair until diagnosis confirms it's what's actually needed. No guesswork, no unnecessary part replacement.

Freon recharge

Regarding Viking Ice Maker repair service in Edgewood: This repair is performed after diagnosis confirms the specific component that failed. We use OEM parts — no aftermarket substitutes.

Local Service Patterns

Ice Maker Service Patterns in Edgewood

Representative ice maker service scenarios from our Edgewood coverage area. Every service visit begins with an on-site diagnosis — no assumptions.

EdgewoodZIP 98371
Resolved

Owner of a house in Edgewood (ZIP 98371) contacted us about their Viking ice maker showing maintenance service. The technician diagnosed the root cause on-site — freon recharge was needed. Completed in a single visit using OEM parts; access notes confirmed before dispatch.

Ice Maker repair in Edgewood

Service Area

Areas We Serve in Edgewood

We cover all 1 neighborhoods in Edgewood — including Edgewood, and ZIP areas such as 98371, 98372, and 98390. No area of the city is outside our service range.

Edgewood

Common Problems

Common Ice Maker Issues in Edgewood

Our technicians are trained to identify and fix these common failure modes using professional diagnostic equipment. If you are dealing with an active failure, our emergency ice maker repair in Edgewood is available now.

Ice maker not working

Regarding Viking Ice Maker repair in Edgewood: Proper diagnosis is required to confirm whether the fault in your ice maker is electrical, related to a control board issue, or tied to water inlet valve function, fill tube condition, ice mold thermostat, and ejector mechanism.

not working
Not making ice

Regarding Viking Ice Maker repair in Edgewood: Proper diagnosis is required to confirm whether the fault in your ice maker is mechanical, related to a failed sensor, or tied to water inlet valve function, fill tube condition, ice mold thermostat, and ejector mechanism.

poor ice production
Not dispensing ice

Regarding Viking Ice Maker repair in Edgewood: Proper diagnosis is required to confirm whether the fault in your ice maker is electrical, related to a control board issue, or tied to water inlet valve function, fill tube condition, ice mold thermostat, and ejector mechanism.

Leaking water

Regarding Viking Ice Maker repair in Edgewood: Proper diagnosis is required to confirm whether the fault in your ice maker is mechanical, related to a failed sensor, or tied to water inlet valve function, fill tube condition, ice mold thermostat, and ejector mechanism.

leaking water
Ice buildup

Regarding Viking Ice Maker repair in Edgewood: Proper diagnosis is required to confirm whether the fault in your ice maker is mechanical, related to a failed sensor, or tied to water inlet valve function, fill tube condition, ice mold thermostat, and ejector mechanism.

ice buildups
Making unusual noise

Regarding Viking Ice Maker repair in Edgewood: Proper diagnosis is required to confirm whether the fault in your ice maker is electrical, related to a control board issue, or tied to water inlet valve function, fill tube condition, ice mold thermostat, and ejector mechanism.

grinding noise
Showing error messages

Regarding Viking Ice Maker repair in Edgewood: Proper diagnosis is required to confirm whether the fault in your ice maker is mechanical, related to a failed sensor, or tied to water inlet valve function, fill tube condition, ice mold thermostat, and ejector mechanism.

error messages
Temperature fluctuations

Regarding Viking Ice Maker repair in Edgewood: Proper diagnosis is required to confirm whether the fault in your ice maker is electrical, related to a control board issue, or tied to water inlet valve function, fill tube condition, ice mold thermostat, and ejector mechanism.

Maintenance service

Regarding Viking Ice Maker repair in Edgewood: Proper diagnosis is required to confirm whether the fault in your ice maker is mechanical, related to a failed sensor, or tied to water inlet valve function, fill tube condition, ice mold thermostat, and ejector mechanism.

annual maintenance

Serviced Viking Models

Professional repair diagnostics and replacement parts are available for the following Viking units in Edgewood, WA:

VUIM515 Professional 5 Series

15-inch undercounter clear ice maker producing crescent-shaped ice cubes. Designed for built-in undercounter installation with a stainless steel door panel. Produces approximately 50 lbs of ice per day and stores up to 25 lbs in the insulated bin.

Production: 2010 – Present Status: current
Key Features:
  • Clear crescent ice production
  • Stainless steel door panel
  • Built-in installation design
FRIM515 Designer Series

Older-generation 15-inch undercounter ice maker from Viking's Designer Series lineup. Produces crescent-shaped ice with a stainless steel door front and straightforward electronic controls. Predecessor to the VUIM515.

Production: 2005 – 2015 Status: discontinued
Key Features:
  • Crescent ice production
  • Stainless steel door panel
  • Built-in undercounter design
VUPD515WSS Professional 5 Series

15-inch undercounter ice and water dispenser combining ice production with a water dispensing function in a single undercounter unit. Features a stainless steel door and electronic touch controls. Designed for built-in installation under a counter or in an island.

Production: 2014 – Present Status: current
Key Features:
  • Combined ice and water dispensing
  • Crescent ice production
  • Stainless steel door panel

Viking Error Codes Directory

Common diagnostic codes for Viking ice maker systems. If your display shows any of these codes, our technicians can resolve the underlying fault:

WARNING!!!
If you are not sure or do not know what you are doing, you must contact a specialist! Attempting self-repair can lead to safety hazards or further damage to your appliance.
(206) 350-0055 Contact Us
Code Description & Meaning Possible Cause Recommended Solution
F11 Meaning: Ice maker fault General ice maker system fault — may indicate harvest motor failure, stuck ice maker arm, sensor fault, or water fill issue Inspect ice maker module for obstructions. Check water supply pressure (minimum 20 PSI required). Test harvest motor operation. Reset ice maker by toggling the power switch. Replace ice maker module if fault persists after checks.
F8 Meaning: Main control board fault Control board internal failure affecting ice maker operation Power cycle the unit. If fault persists, replace the main control board.
PF Meaning: Power failure indicator Power interruption detected during operation Normal after power outage. Allow ice maker to complete a full cycle before evaluating ice production.

Our Service Standards

Precision Service for Premium Appliances

We believe in honest, transparent refrigeration repair. Here is what you can expect when you choose FridgeRepair.pro.

Flat-Rate Service Call

Every repair begins with a professional on-site diagnostic visit for $157. Our technician will identify the exact cause and provide a firm quote before any work starts.

  • Fee Credited: If you proceed with the repair, your $157 service call fee is credited toward the total cost of the job.
  • No Hidden Fees: The price we quote after diagnosis is the price you pay. No surprises.
  • Honest Assessment: If a repair isn't cost-effective due to parts availability or unit age, we'll tell you upfront.
  • Professional Quote: Total repair cost is based on repair complexity plus required OEM parts.

Service Warranty

We stand behind our work. Your repair is protected by our comprehensive service guarantee to give you peace of mind.

  • Labor Warranty: All repair work is covered for a specific period against defects in workmanship.
  • Parts Warranty: OEM parts come with their own manufacturer warranty, typically ranging from 90 days to 1 year.
  • Fast Follow-up: If the issue persists, we prioritize your return visit to resolve it immediately.

OEM Parts Only Policy

We never use aftermarket or "generic" parts that can compromise your appliance's performance or safety.

  • Perfect Fit: OEM parts are designed specifically for your model's engineering.
  • Long-Term Reliability: Genuine components last longer and prevent secondary failures.
  • Safety First: Original parts maintain the safety ratings and certifications of your appliance.

What to Expect

1
Arrival: Technician arrives within your 2-hour window and protects your flooring/surfaces.
2
Diagnosis: Full system inspection to identify the exact cause of the failure.
3
Quote: You receive a firm price for parts and labor. No work starts without approval.
4
Repair: Most jobs are completed in the same visit using stocked OEM parts.

Service Options

Viking Ice Maker Repair Services in Edgewood

Choose the service type that fits your situation. Every option includes the same certified technicians, OEM parts, and transparent pricing.

Same-Day Service

Fast-tracked repair completed the same day you call — ideal for appliance failures that can't wait but aren't full emergencies.

Same day (book before noon)

Emergency Repair

Immediate-response service for critical appliance failures — leaks, food-safety risks, or anything that cannot safely wait until the next day.

Typically within 2 hours

Diagnostic Service

Professional appliance assessment before committing to a repair — a thorough inspection that tells you exactly what's wrong and whether it's worth fixing.

Same or next day

Appliance Tune-Up

Scheduled preventive maintenance to extend appliance lifespan, improve efficiency, and catch wear issues before they turn into expensive failures.

Scheduled — same or next week

Weekend Appliance Repair

Full-quality appliance repair on Saturday and Sunday — same technicians, same parts, same pricing as weekday service.

Saturday–Sunday, 8:00 AM – 8:00 PM

Urgent Appliance Repair

Fast-tracked repair for time-sensitive situations that need resolution within 24 hours — not a full emergency, but too important to wait days for a standard slot.

Within 24 hours

Residential Appliance Repair

In-home appliance repair for all household appliances — done at your residence, on your schedule, with no need to move or transport anything.

Same or next day

Commercial Appliance Repair

Professional repair for business-grade and commercial appliances — restaurants, laundromats, office kitchens, and hospitality environments where downtime directly costs money.

Priority scheduling for business clients

Schedule an on-site Viking inspection

Service Area

Viking Ice Maker Repair Coverage in Edgewood, WA

Serving Edgewood and all other areas in Edgewood, WA.

Edgewood
983719837298390

Explore More

Related Services

Other Appliances

If your Viking issue extends to another appliance, our technicians also cover:

Same Brand, Other Cities

Looking for Viking service in other Greater Seattle Area communities? We also cover:

Same Service, Other Cities

Other Greater Seattle cities where we perform ice maker repair:

Viking ice maker Problem in Edgewood? We Can Help.

Transparent quote before we touch anything. No hidden fees. Mon – Sun: 8:00 AM – 8:00 PM.

(206) 350-0055 Schedule Online
Technician will confirm arrival time · Takes 30 seconds

FAQ

Viking Ice maker FAQ — Edgewood, WA

How quickly can you schedule Viking Ice maker repair in Edgewood?
Most Viking ice maker appointments in Edgewood are available within 1–2 days. Same-day availability is possible for urgent situations — call before noon to check current slot availability in Edgewood.
What are the most common Viking Ice maker problems you see in Edgewood homes?
In our experience servicing Viking ice makers across Edgewood, the most frequently reported issues involve cooling or heating performance, component wear in older units, and error code faults. These are all diagnosable and usually completed in one service visit.
My Viking ice maker stopped producing ice completely. Where should I start?
The most common culprits are an overdue water filter, a frozen fill tube, or a failed ice maker control board. Check that the ice maker arm is in the down position first — it's an easy-to-overlook cause. If basic checks don't resolve it, a diagnostic visit will pinpoint the failed component.
The ice from my Viking ice maker has an unusual taste or smell.
Off-tasting ice is most often caused by an overdue water filter or biofilm accumulation in the water lines. We recommend replacing Viking water filters every 6 months as a baseline. If the ice maker module itself has developed contamination, cleaning or replacement may be needed.
Are your technicians specifically trained on Viking Ice makers?
Viking ice makers are precision-engineered systems with component tolerances and fault patterns that require brand-specific knowledge. Our technicians are familiar with Viking diagnostic procedures, component access, and OEM part specifications. We don't treat Viking repairs as generic appliance calls.
Are your technicians familiar with common ice maker setups in Edgewood homes?
We've worked across Edgewood for years and understand the local building types and common appliance setups. This means fewer surprises on the service visit and faster diagnosis.
Are your technicians licensed to perform appliance repair in Washington State?
Yes — our technicians are licensed and trained to perform appliance repair in Washington State. We're an independent out-of-warranty repair specialist — not affiliated with any manufacturer's authorized service network. This means we can service any brand objectively, without manufacturer-imposed limitations.
How quickly can you send a technician to Edgewood for ice maker repair?
Edgewood is within our primary service radius, so next-day appointments are standard with same-day options available. Technicians serve all neighborhoods with flexible scheduling. We serve all 1 neighborhoods.
Call Now Text Book